/*
  BOPM configuration for irc.rc6.org
*/

options {
	/*
	 * Full path and filename for storing the process ID of the running
	 * BOPM.
	 */
	pidfile = "/var/run/bopm/bopm.pid";

	/*
	 * How many seconds to store the IP address of hosts which are
	 * confirmed (by previous scans) to be secure.  New users from these
	 * IP addresses will not be scanned again until this amount of time
	 * has passed. IT IS STRONGLY RECOMMENDED THAT YOU DO NOT USE THIS
	 * DIRECTIVE, but it is provided due to demand.
	 *
	 * The main reason for not using this feature is that anyone capable
	 * of running a proxy can get abusers onto your network - all they
	 * need do is shut the proxy down, connect themselves, restart the
	 * proxy, and tell their friends to come flood.
	 *     
	 * Keep this directive commented out to disable negative caching.
	 */
  #	negcache = 3600;

	/*
	 * Amount of file descriptors to allocate to asynchronous DNS.  64
	 * should be plenty for almost anyone - previous versions of BOPM only
	 * did one at a time!
	 */
	dns_fdlimit = 64;

	/*
	 * Put the full path and filename of a logfile here if you wish to log
	 * every scan done.  Normally BOPM only logs successfully detected
	 * proxies in the bopm.log, but you may get abuse reports to your ISP
	 * about portscanning.  Being able to show that it was BOPM that did
	 * the scan in question can be useful.  Leave commented for no
	 * logging.
	 */
  #	scanlog = "/var/log/bopm/scan.log";
};


IRC {
	/*
	 * IP to bind to for the IRC connection.  You only need to use this if
	 * you wish BOPM to use a particular interface (virtual host, IP
	 * alias, ...) when connecting to the IRC server.  There is another
	 * "vhost" setting in the scan {} block below for the actual
	 * portscans.  Note that this directive expects an IP address, not a
	 * hostname.  Please leave this commented out if you do not
	 * understand what it does, as most people don't need it.
	 */
  #	vhost = "0.0.0.0";

	/*
	 * Nickname for BOPM to use.
	 */
	nick = "bopm";

	/*
	 * Text to appear in the "realname" field of BOPM's /whois output.
	 */
	realname = "Blitzed Open Proxy Monitor";

	/*
	 * If you don't have an identd running, what username to use.
	 */
	username = "bopm";

	/*
	 * Hostname (or IP) of the IRC server which BOPM will monitor
	 * connections on.
	 */
	server = "127.0.0.1";


	/*
	 * Password used to connect to the IRC server (PASS)
	 */
	 
  #	password = "secret";


	/*
	 * Port of the above server to connect to.  This is what BOPM uses to
	 * get onto IRC itself, it is nothing to do with what ports/protocols
	 * are scanned, nor do you need to list every port your ircd listens
	 * on.
	 */
	port = 6667;

	/*
	 * Command to execute to identify to NickServ (if your network uses
	 * it).  This is the raw IRC command text, and the below example
	 * corresponds to "/msg nickserv identify password" in a client.  If
	 * you don't understand, just edit "password" in the line below to be
	 * your BOPM's nick password.  Leave commented out if you don't need
	 * to identify to NickServ.
	 */
  nickserv = "privmsg nickserv :identify XXXXXX";

	/*
	 * The username and password needed for BOPM to oper up.
	 */
	oper = "bopm XXXXXX";
 
	/*
	 * Mode string that BOPM needs to set on itself as soon as it opers
	 * up.  This needs to include the mode for seeing connection notices,
	 * otherwise BOPM won't scan anyone (that's usually umode +c).  It's
	 * often also a good idea to remove any helper modes so that users
	 * don't try to talk to the BOPM.
	 *
	 * REMEMBER THAT IRCU AND LATER VERSIONS OF UNREAL DO NOT USE A SIMPLE
	 * +c !!
	 */

  /*
   * These modes show ALL connections, and helper mode is disabled to stop people 
   * from talking to the bot.
   * other options: "+sc" and "+c-h"
   */
   mode = "+s +cF -h"; 


	/*
	 * If this is set then BOPM will use it as an /away message as soon as
	 * it connects.
	 */
	away = "I'm a bot.  Your messages will be ignored.";

	/*
	 * Info about channels you wish BOPM to join in order to accept
	 * commands.  BOPM will also print messages in these channels every
	 * time it detects a proxy.  Only IRC operators can command BOPM to do
	 * anything, but some of the things BOPM reports to these channels
	 * could be soncidered sensitive, so it's best not to put BOPM into
	 * public channels.
	 */
	channel {
	   /*
	    * Channel name.  Local ("&") channels are supported if your ircd
	    * supports them.
	    */
	   name = "#bopm";

	   /*
	    * If BOPM will need to use a key to enter this channel, this is
	    * where you specify it.
	    */
	   key = "XXXXXX";

	   /*
	    * If you use ChanServ then maybe you want to set the channel
	    * invite-only and have each BOPM do "/msg ChanServ invite" to get
	    * itself in.  Leave commented if you don't, or if this makes no
	    * sense to you.
	    */
     # invite = "privmsg chanserv :invite #bopm";
	};

	/*
	 * You can define a bunch of channels if you want:
	 *
	 * channel { name = "#other"; }; channel { name="#channel"; }
	 */
       
	/*
	 * connregex is a POSIX regular expression used to parse connection
	 * (+c) notices from the ircd. The complexity of the expression should
	 * be kept to a minimum.
	 *  
	 * Items in order MUST be: nick user host IP
	 *
	 * BOPM will not work with ircds which do not send an IP in the
	 * connection notice.
	 *
	 * This is fairly complicated stuff, and the consequences of getting
	 * it wrong are the BOPM does not scan anyone.  Unless you know
	 * absolutely what you are doing, please just uncomment the example
	 * below that best matches the type of ircd you use.
	 *
	 * !!! NOTE !!! If a connregex for your ircd does not appear here and the
	 * hybrid connregex does not appear to work, check the BOPM FAQ at 
	 * http://wiki.blitzed.org/BOPM before contacting our lists for help.
	 *
	 */

	/* Hybrid / Bahamut / Unreal (in HCN mode) */
	# connregex = "\\*\\*\\* Notice -- Client connecting: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*"; #regular
  # connregex = "\\*\\*\\* Notice -- Client connecting.*: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*"; # far connects
    connregex = "\\*\\*\\* Notice -- Client connecting[.A-Za-z0-9 ]*: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";

	/*
	 * "kline" controls the command used when an open proxy is confirmed.
	 * We suggest applying a temporary (no more than a few hours) KLINE on the host.
	 *
	 * <WARNING>
         * Make sure if you need to change this string you also change the
         * kline command for every DNSBL you enable below.
	 *
         * Also note that some servers do not allow you to include ':' characters
         * inside the KLINE message (e.g. for a http:// address).
	 *
	 * Users rewriting this message into something that isn't even a valid
	 * IRC command is the single most common cause of support requests and
	 * therefore WE WILL NOT SUPPORT YOU UNLESS YOU USE ONE OF THE EXAMPLE
	 * KLINE COMMANDS BELOW.
	 * </WARNING>
	 *
	 * That said, should you wish to customise this text, several
	 * printf-like placeholders are available:
	 *
	 *  %n     User's nick
	 *  %u     User's username
	 *  %h     User's irc hostname
	 *  %i     User's IP address
	 *
	 */
	# kline = "KLINE *@%h :Open Proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";

	/* A GLINE example for IRCu: */
  # kline = "GLINE +*@%i 1800 :Open proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";

  /* An AKILL example for services with OperServ
   * Your BOPM must have permission to AKILL for this to work! */
  # kline = "PRIVMSG OpenServ :AKILL +3h *@%h Open proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";

  /* default kline
   *  %n User's nick
   *  %u User's username     - REMEMBER!
   *  %h User's irc hostname - bots (& blacklists) don't necessarily have (contain) hostnames
   *  %i User's IP address   - but they ALWAYS have IPs */
  kline = "gline +*@%i 7d :Open Proxy found on your host.";
       
	/*
	 * Text to send on connection, these can be stacked and will be sent in this order
	 * 
	 * !!! UNREAL USERS PLEASE NOTE !!!
	 * Unreal users will need PROTOCTL HCN to force hybrid connect
	 * notices.
	 *
	 * Yes Unreal users!  That means you!  That means you need the line
	 * below!  See that thing at the start of the line?  That's what we
	 * call a comment!  Remove it to UNcomment the line.
	 */
	perform = "PROTOCTL HCN";

};


/*
 * OPM Block defines blacklists and information required to report new proxies
 * to a dns blacklist.  DNS-based blacklists store IP addresses in a DNS zone
 * file. There are several blacklist that list IP addresses known to be open
 * proxies or other forms of IRC abuse. By checking against these blacklists,
 * BOPMs are able to ban known sources of abuse without completely scanning them.
 */

OPM {

  blacklist {
    name = "dnsbl.dronebl.org";
    type = "A record reply";
    reply {
      3 = "IRC Drone";
      4 = "Tor";
      5 = "Bottler";
      6 = "Unknown spambot or drone";
      7 = "DDOS Drone";
      8 = "SOCKS Proxy";
      9 = "HTTP Proxy";
      10 = "ProxyChain";
    };
   ban_unknown = no;
   kline = "gline +*@%i 7d :DroneBL dronebl.org/lookup_branded.do?ip=%i";
  };

  blacklist {
    name = "tor.dnsbl.sectoor.de";
    type = "A record reply";
    reply {
      1 = "Tor exit server";
    };
    ban_unknown = no;
    kline = "KLINE *@%h :Tor exit server detected. See www.sectoor.de/tor.php?ip=%i";
  };

};

/*
 * The short explanation:
 *
 * This is where you define what ports/protocols to check for.  You can have
 * multiple scanner blocks and then choose which users will get scanned by
 * which scanners further down.
 *
 * The long explanation:
 *
 * Scanner defines a virtual scanner.  For each user being scanned, a scanner
 * will use a file descriptor (and subsequent connection) for each protocol.
 * Once connecting it will negotiate the proxy to connect to
 * target_ip:target_port (target_ip MUST be an IP).
 *
 * Once connected, any data passed through the proxy will be checked to see if
 * target_string is contained within that data.  If it is the proxy is
 * considered open. If the connection is closed at any point before
 * target_string is matched, or if at least max_read bytes are read from the
 * connection, the negotiation is considered failed.
 */

scanner {

	/*
	 * Unique name of this scanner.  This is used further down in the
	 * user {} blocks to decide which users get affected by which
	 * scanners.
	 */
	name="default";

	/*
	 * HTTP CONNECT - very common proxy protocol supported by widely known
	 * software such as Squid and Apache.  The most common sort of
	 * insecure proxy and found on a multitude of weird ports too.  Offers
	 * transparent two way TCP connections.
	 */
	protocol = HTTP:80;
	protocol = HTTP:8080;
	protocol = HTTP:3128;
	protocol = HTTP:6588;

	/*
	 * SOCKS4/5 - well known proxy protocols, probably the second most
	 * common for insecure proxies, also offers transparent two way TCP
	 * connections.  Fortunately largely confined to port 1080.
	 */
	protocol = SOCKS4:1080;
	protocol = SOCKS5:1080;

	/*
	 * Cisco routers with a default password (yes, it really does happen).
	 * Also pretty much anything else that will let you telnet to anywhere
	 * else on the internet.  Fortunately these are always on port 23.
	 */
	protocol = ROUTER:23;

	/*
	 * WinGate is commercial windows proxy software which is now not so
	 * common, but still to be found, and helpfully presents an interface
	 * that can be used to telnet out, on port 23.
	 */
	protocol = WINGATE:23;

	/*
	 * The HTTP POST protocol, often dismissed when writing the access
	 * controls for proxies, but sadly can still be used to abused.
	 * Offers only the opportunity to send a single block of data, but
	 * enough of them at once can still make for a devastating flood.
	 * Found on the same ports that HTTP CONNECT proxies inhabit.
	 *
	 * Note that if your ircd has "ping cookies" then clients from HTTP
	 * POST proxies cannot actually ever get onto your network anyway.  If
	 * you leave the checks in then you'll still find some (because some
	 * people IRC from boxes that run them), but if you use BOPM purely as
	 * a protective measure and you have ping cookies, you need not scan
	 * for HTTP POST.
	 */
	protocol = HTTPPOST:80;

	/*
	 * IP this scanner will bind to.  Use this if you need your scans to
	 * come FROM a particular interface on the machine you run BOPM from.
	 * If you don't understand what this means, please leave this
	 * commented out, as this is a major source of support queries!
	 */
#	vhost = "127.0.0.1";

	/* Maximum file descriptors this scanner can use.  Remember that there
	 * will be one FD for each protocol listed above.  As this example
	 * scanner has 8 protocols, it requires 8 FDs per user.  With a 512 FD
	 * limit, this scanner can be used on 64 users _at the same time_.
	 * That should be adequate for most servers.
	 */
	fd = 512;

	/*
	 * Maximum data read from a proxy before considering it closed.  Don't
	 * set this too high, some people have fun setting up lots of ports
	 * that send endless data to tie up your scanner.  4KB is plenty for
	 * any known proxy.
	 */
	max_read = 4096;

	/*
	 * Amount of time (in seconds) before a test is considered timed out.
	 * Again, all but the poorest slowest proxies will be detected within
	 * 30 seconds, and this helps keep resource usage low.
	 */
	timeout = 30;

	/* 
	 * Target IP to tell the proxy to connect to
	 * 
	 * !!! THIS MUST BE CHANGED !!!
	 *
	 * You cannot instruct the proxy to connect to itself! The easiest
	 * thing to do would be to set this to the IP of your ircd and then
	 * keep the default target_strings.
	 *
	 * Please use an IP that is publically reachable from anywhere on the
	 * Internet, because you have no way of knowing where the insecure
	 * proxies will be located.  Just because you and your BOPM can
	 * connect to your ircd on some private IP like 192.168.0.1, does not
	 * mean that the insecure proxies out there on the Internet will be
	 * able to.  And if they never connect, you will never detect them.
	 *
	 * Remember to change this setting for every scanner you configure.
	 *
	 */
	target_ip     = "85.17.184.215"; # rc6 was "127.0.0.1";

	/*
	 * Target port to tell the proxy to connect to.  This is usually
	 * something like 6667.  Basically any client-usable port.
	 */
	target_port   = 6667;

	/* 
	 * Target string we check for in the data read back by the scanner.
	 * This should be some string out of the data that your ircd usually
	 * sends on connect.  The example below will work on most
	 * hybrid/bahamut ircds.  Multiple target strings are allowed.
	 *
	 * NOTE: Try to keep the number of target strings to a minimum. Two
	 *       should be fine. One for normal connections and one for throttled
	 *       connections. Comment out any others for efficiency.
	 */

	/* Usually first line sent to client on connection to ircd. 
	 * If your ircd supports a more specific line (see below),
	 * using it will reduce false positives.
	 */
	target_string = "*** Looking up your hostname...";

	/* Some ircds give a source for the NOTICE AUTH (bahamut for example).
	 * It is recommended you use the following instead of the generic
	 * "*** Looking up your hostname..." if your ircd supports it. 
	 * This will reduce the chances of false positives.
	 */
#	target_string = ":server.yournetwork.org NOTICE AUTH :*** Looking up your hostname...";

	/* If you try to connect too fast, you'll be throttled by your own
	 * ircd.  Here's what a hybrid throttle message looks like:
	 */
	target_string = "ERROR :Trying to reconnect too fast.";

	/* And the same for bahamut (comment this out if you're not using bahamut): */
	target_string = "ERROR :Your host is trying to (re)connect too fast -- throttled.";
};

scanner {
	name = "extended";

	protocol = HTTP:81;
	protocol = HTTP:8000;
	protocol = HTTP:8001;
	protocol = HTTP:8081;

	protocol = HTTPPOST:81;
	protocol = HTTPPOST:6588;
#	protocol = HTTPPOST:4480;
	protocol = HTTPPOST:8000;
	protocol = HTTPPOST:8001;
	protocol = HTTPPOST:8080;
	protocol = HTTPPOST:8081;

	/*
	 * IRCnet have seen many socks5 on these ports, more than on the
	 * standard ports even.
	 */
	protocol = SOCKS4:4914;
	protocol = SOCKS4:6826;
	protocol = SOCKS4:7198;
	protocol = SOCKS4:7366;
	protocol = SOCKS4:9036;

	protocol = SOCKS5:4438;
	protocol = SOCKS5:5104;
	protocol = SOCKS5:5113;
	protocol = SOCKS5:5262;
	protocol = SOCKS5:5634;
	protocol = SOCKS5:6552;
	protocol = SOCKS5:6561;
	protocol = SOCKS5:7464;
	protocol = SOCKS5:7810;
	protocol = SOCKS5:8130;
	protocol = SOCKS5:8148;
	protocol = SOCKS5:8520;
	protocol = SOCKS5:8814;
	protocol = SOCKS5:9100;
	protocol = SOCKS5:9186;
	protocol = SOCKS5:9447;
	protocol = SOCKS5:9578;

	/*
	 * These came courtsey of Keith Dunnett from a bunch of public open
	 * proxy lists.
	 */
	protocol = SOCKS4:29992;
	protocol = SOCKS4:38884;
	protocol = SOCKS4:18844;
	protocol = SOCKS4:17771;
	protocol = SOCKS4:31121;

	fd = 400;

	/* If required you can add settings such as target_ip here
	 * they will override the defaults set in the first scanner
	 * for this and subsequent scanners defined in the config file
	 * This affects the following options:
	 * fd, vhost, target_ip, target_port, target_string, timeout and
	 * max_read.
	 */
};



/*
 * User blocks define what scanners will be used to scan which hostmasks. When
 * a user connects they will be scanned on every scanner {} (above) that
 * matches their host.
 */

user {
	/*
	 * Users matching this host mask will be scanned with all the
	 * protocols in the scanner named.
	 */
	mask = "*!*@*";
	scanner = "default";
};

user {
	/* Connections without ident will match on a vast number of connections
	 * very few proxies run ident though */
#	mask = "*!~*@*";
	mask = "*!squid@*";
	mask = "*!nobody@*";
	mask = "*!www-data@*";
	mask = "*!cache@*";
	mask = "*!CacheFlowS@*";
	mask = "*!*@*www*";
	mask = "*!*@*proxy*";
	mask = "*!*@*cache*";

	scanner = "extended";
};


/*
 * Exempt hosts matching certain strings from any form of scanning or dnsbl.
 * BOPM will check each string against both the hostname and the IP address of
 * the user.
 *
 * There are very few valid reasons to actually use "exempt".  BOPM should
 * never get false positives, and we would like to know very much if it does.
 * One possible scenario is that the machine BOPM runs from is specifically
 * authorized to use certain hosts as proxies, and users from those hosts use
 * your network.  In this case, without exempt, BOPM will scan these hosts,
 * find itself able to use them as proxies, and ban them.
 */
exempt {
	mask = "*!*@127.0.0.1";
};
